Release Notes for JMRI 4.25.8 release

Date: December 3, 2021

From: Bob Jacobsen

Subject: Test Release 4.25.8 of JMRI/DecoderPro is available for download.

Notes:

This is a test release. Please post a note if you encounter any new or old bugs! And please back up your JMRI files before installing this, in case you want to go back to an earlier version.

This is the next in a series of test releases. We expect this series to end in the next JMRI production release at the end of 2021. (See the tentative release schedule)

We are getting close to the production release, so it would be very helpful if you could try this test release and let us know of any problems you find.

JMRI is now only available under the GNU General Public License. For more information, please see our copyright and licensing page.

Update From Older JMRI Versions

If you are currently using a version older than JMRI 4.20, please follow these instructions carefully:

1. Is your current version older than JMRI 4.12? If so, then update to JMRI 4.12 first, and ensure everything works correctly: check start-up, check things you need to be working, and check the JMRI log as well) before doing anything else. Store your configuration and panel files under a new name and use those from now on. Then continue with step 2.

   If you are currently using JMRI 4.7.3 or earlier on Linux or macOS (Windows doesn't need this), then it's very important that you update to JMRI 4.12 and carrying out the migration process described in the JMRI 4.12 release note before updating to any later relese.

2. Is your current version older than JMRI 4.20? Then update to JMRI 4.20 first, and ensure that works correctly (check start-up, check things you need to be working, and check the JMRI log as well) before doing anything else. Save your preferences again. Store your configuration and panel files under a new name and use those from now on.
3. You can then install this release.

Following this multi-step order of updating via stable major releases safeguards you against possible migration issues that can arise from skipping these versions.

New problems with this release

• None

New warnings for this release:

Older warnings

See the JMRI 4.20 release note for more warnings predating the 4.21 development series, including pointers to various migration issues. These may be relevant to you if you're updating from an earlier version; we strongly recommend you update to JMRI 4.20 installing this test release.

• Since JMRI 4.21.4 If you use a Safari browser on macOS X, the local help system might not work. There are two workarounds:
  1. If your computer is connected to the internet, use the web-based help. Go to JMRI Preferences, then select Help on the left, then click "Open help pages online"; save and restart
  2. To get local access, you can select Safari's Preferences, then the Advanced pane, then checkmark "Show Develop menu in menu bar"
  If you're using another browser, like Chrome or Firefox, you shouldn't encounter this issue.
• Since JMRI 4.21.1 The jmri.jmrix.SystemConnectionMemo class has become a jmri.SystemConnectionMemo interface and a jmri.jmrix.DefaultSystemConnectionMemo class. This may require changes to scripts. If you have a script that references jmri.jmrix.SystemConnectionMemo, please change it to either jmri.SystemConnectionMemo or jmri.jmrix.DefaultSystemConnectionMemo (it's easier to have you just try the two than to explain which one will work in which case)
• Since JMRI 4.21.1 The way preferences are loaded at startup has been slightly modified. There is no impact to JMRI applications, but Non-JMRI applications that are not derived from apps.Apps or apps.AppsBase but are using jmri.implementation.JmriConfigurationManager to load preferences will no longer see preferences if an error occurs. To restore the old behavior, use apps.AppsConfigurationManager instead.
• Since JMRI 4.11.4 There are issues with the Pi-SPROG One command station operation. A number of workarounds should be applied:
  • Do not turn on the track power until the power supply to the Pi-SPROG ONE is turned on
  • Do not enable extra debugging through default.lcf, nor open the system console window
  • Do not open the SPROG console window
  • Disable power conversion (CV 29) in all locos
  • If connecting via VNC (or similar), setup the screen layout before turning on the track power
  Pi-SPROG One with version 2.4 or earlier firmware will cause a timeout after a track short circuit. A dialog box will open to inform the user of this. The track power will be turned off and must be turned on again using the power control.

Download links:

Changes since Test Release 4.25.7:

The list of included changes is available from our GitHub code repository.

Hardware Support

CBUS

• Improvements to CBUS node support.

LocoNet

• Added connection support for the RR-CirKits LocoBuffer-NG.

LogixNG

• Fixed some issues with minor edge cases.

Warrants

• Fixed a problem found in JMRI 4.25.7 with stopping logic.

Miscellaneous

• Fix error after deleting a Memory and suppressing messages.

---