Skip to main content

JMRI® is...
DecoderPro®
Advanced
Applications
By the community of JMRI.org:
Tools
JMRI tools for working with your layout:
Layout Automation
Use JMRI to automate parts of your layout and operations:
Supported hardware
JMRI supports a wide range of devices, DCC systems, command stations, networks, and protocols.
JMRI Setup and Installation
JMRI environments...

JMRI Help:

Contents Index
Glossary FAQ

Donate to JMRI.org

JMRI: DecoderPro User Guide

Locomotive Files

DecoderPro maintains the information for each roster entry in a separate file. You generally don't have to edit these, or even look at them. This page describes their content just in case you're interested.

First, the XML contains some header information that describes the format & history of the file:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE locomotive-config SYSTEM "locomotive-config.dtd">
<locomotive-config>
<!--Written by JMRI version 1.6.1 on Sat Oct 08 07:00:30 PDT 2005 $Id$-->

This is followed by the summary information for the entry. Most of this comes from the "Roster Entry" pane in DecoderPro:

<locomotive id="UP 792" roadNumber="" roadName="" mfg="" model="" dccAddress="792" comment="">
<decoder model="DH163" family="Series 3 with FX3, silent, readback" comment="" />

That's then followed by a section that contains values for all the variables defined in the decoder definition file. Note that these are numeric values; the decoder definition file are used to convert these to strings, etc, when this is read back in.

<values>
<decoderDef>
<varValue item="Primary Address" value="24" />
<varValue item="Start Volts" value="0" />
<varValue item="Acceleration Rate" value="0" />
<varValue item="Deceleration Rate" value="0" />
<varValue item="Max Volts" value="0" />
<varValue item="Mid Volts" value="0" />
<varValue item="Version ID" value="0" />

Finally, there's a similar section that contains numeric values for all the CVs. We store both variables and CVs so that if a decoder definition changes in the future, we can sort out what's actually in the decoder.

<CVvalue name="1" value="24" />
<CVvalue name="2" value="0" />
<CVvalue name="3" value="0" />
<CVvalue name="4" value="0" />