ZTC 4007 decoder definition

Decoder Family: ZTC 4007

ZTC 4007

CV Definitions:

CV	Positions	Values
2
3
4
5
6
9
11
12
14
25
27		Disable Enable stop when Right Rail has +ve asymetric signal Enable stop when Left Rail has +ve asymetric signal Enable stop when either Rail has +ve asymetric signal
28		Disabled Constant Broadcast Broadcast on Asymetric Signal
29	XXXXVXXX
29	XXXVXXXX	Use Vstart, Vmid, Vhigh Use table in CVs 66 through 95
33	XXXXXXXV
33	XXXXXXVX
33	XXXXXVXX
34	XXXXXXXV
34	XXXXXXVX
34	XXXXXVXX
35	XXXXXXXV
35	XXXXXXVX
35	XXXXXVXX
36	XXXXXXXV
36	XXXXXXVX
36	XXXXXVXX
36	XXXXVXXX
37	XXXXXXXV
37	XXXXXXVX
37	XXXXXVXX
37	XXXXVXXX
37	XXXVXXXX
48
49	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
50	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
51	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
56
57
58
60
61

Reset delle CV ai valori di fabbrica ZTC Real Slow Mode Enable ZTC

This page was produced by JMRI.

JMRI, DecoderPro, PanelPro, DispatcherPro and associated logos are our trademarks.

Additional information on copyright, trademarks and licenses is linked here.