ZTC 255 decoder definition

Decoder Family: ZTC 255

ZTC 255

CV Definitions:

CV	Positions	Values
2
3
4
5
6
9
11
12	XXXXXXXV
25
27
28
29	XXXXVXXX	disabled Constant Broadcast Broadcast on Asymetric Signal
29	XXXVXXXX	Use Vstart, Vmid, Vhigh Use table in CVs 66 through 95
33	XXXXVXXX
34	XXXXVXXX
33	XXXVXXXX
34	XXXVXXXX
35	XXXXXXXV
35	XXXXXXVX
35	XXXXXVXX
35	XXXXVXXX
35	XXXVXXXX
35	XXVXXXXX
35	XVXXXXXX
35	VXXXXXXX
36	XXXXXXXV
36	XXXXXXVX
36	XXXXXVXX
36	XXXXVXXX
36	XXXVXXXX
36	XXVXXXXX
36	XVXXXXXX
36	VXXXXXXX
37	XXXXXXXV
37	XXXXXXVX
37	XXXXXVXX
37	XXXXVXXX
37	XXXVXXXX
37	XXVXXXXX
37	XVXXXXXX
37	VXXXXXXX
38	XXXXXXXV
38	XXXXXXVX
38	XXXXXVXX
38	XXXXVXXX
38	XXXVXXXX
38	XXVXXXXX
38	XVXXXXXX
38	VXXXXXXX
48
49	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
50	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
51	XXVVVVVV	Output is ON or OFF On/Off 8 times per second On/Off 3.5 times per second On/Off 2.5 times per second On/Off 2 times per second On/Off every second On/Off every 2 seconds On/Off every 4 seconds On for 0.05 seconds then Off On for 0.1 seconds then Off On for 0.2 seconds then Off On for 0.3 seconds then Off On for 0.4 seconds then Off On for 0.5 seconds then Off On for 0.6 seconds then Off On for 0.7 seconds then Off On for 0.8 seconds then Off On for 0.9 seconds then Off On for 1 second then Off Dim Level 1. This is the dimmest setting Dim Level 2. Dim Level 3. Dim Level 4. Dim Level 5. Dim Level 6. Dim Level 7. Dim Level 8. Dim Level 9. Dim Level 10. Dim Level 11. Dim Level 12. Dim Level 13. Dim Level 14. Dim Level 15. Dim Level 16. This is the brightest setting Mars effect Beacon effect Flame effect Ashpan effect
52
56
57
58
60
61

Reset delle CV ai valori di fabbrica Motor Feedback Enable 1=On ZTC Real Slow Mode Enable/Disable 1=On Decoder Automatic Stopping Configuration 1=On Motor Drive Selection ZTC

This page was produced by JMRI.

JMRI, DecoderPro, PanelPro, DispatcherPro and associated logos are our trademarks.

Additional information on copyright, trademarks and licenses is linked here.