| CV | Name | Positions | Values |
| 2 | | |
|
| 3 | | |
|
| 4 | | |
|
| 5 | | |
|
| 6 | | |
- Linear
- Slow - increase at slow speed
- Fast - increase at fast speed
|
| 7 | | |
|
| 8 | | |
|
| 49 | | |
|
| 50 | | |
|
| 51 | | |
|
| 52 | | |
|
| 53 | | |
|
| 54 | | |
|
| 55 | | |
|
| 56 | | |
|
| 58 | | |
|
| 59 | | |
|
| 60 | | |
|
| 61 | | |
|
| 62 | | |
|
| 63 | | |
|
| 64 | | |
|
| 113 | | |
|
| 114 | | |
|
| 115 | | |
|
| 116 | | |
- Off
- Type 1
- Type 2
|
| 117 | | |
- Mode 1- All Lights controlable
- Mode 2- No rear light
- Mode 3- No lights at all
- Mode 4- No front lights (including ditch, gyra,strobe
|
| 122 | | |
- Off
- Auto notch - RPM and notch synchro to speed
- Linear notch - RPM synchro to speed
- Manual notch - notch up/down with F8/F9
|
Reset delle CV ai valori di fabbrica
MRC NOTE: Some DCC systems do not have enough power on the program track for programming
sound decoders. If your system is one of these, There are Program Track Boosters availlable
from aftermarket DCC suppliers.
MRC NOTE: Because this locomotive has a dual function sound decoder on board, it does not
support CV read back features. This decoder supports all program methods including;
register mode, paged mode, CV programming mode, direst mode, and programming on the
main [OPS mode programming]. Program the locomotive the same way you would program any
other NMRA compatible decoder with your DCC system.
MRC